This is the latest recevied telemetry packets stored in our database for station/object E25PHR-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU* | Satellite* | HDOP* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795083235 | 44 °C | 10 | 0 | 0 | 0 |
| 1795083225 | 44 °C | 9 | 0 | 0 | 0 |
| 1795082918 | 44 °C | 12 | 0 | 0 | 0 |
| 1795082880 | 46 °C | 11 | 0 | 0 | 0 |
| 1795082735 | 44 °C | 11 | 0 | 0 | 0 |
| 1795082588 | 49 °C | 12 | 0 | 0 | 0 |
| 1795082560 | 46 °C | 12 | 0 | 0 | 0 |
| 1795082456 | 44 °C | 12 | 0 | 0 | 0 |
| 1795082233 | 44 °C | 12 | 0 | 0 | 0 |
| 1795082169 | 44 °C | 11 | 0 | 0 | 0 |
| 1795082092 | 44 °C | 12 | 0 | 0 | 0 |
| 1795082039 | 44 °C | 12 | 0 | 0 | 0 |
| 1795082028 | 44 °C | 12 | 0 | 0 | 0 |
| 1795081881 | 45 °C | 11 | 0 | 0 | 0 |
| 1795081822 | 44 °C | 10 | 0 | 0 | 0 |
| 1795081745 | 46 °C | 10 | 0 | 0 | 0 |
| 1795080944 | 46 °C | 12 | 0 | 0 | 0 |
| 1795080234 | 45 °C | 11 | 0 | 0 | 0 |
| 1795079620 | 45 °C | 10 | 0 | 0 | 0 |
| 1795079161 | 48 °C | 10 | 0 | 0 | 0 |
| 1795079125 | 47 °C | 10 | 0 | 0 | 0 |
| 1795079086 | 46 °C | 10 | 0 | 0 | 0 |
| 1795079040 | 46 °C | 10 | 0 | 0 | 0 |
| 1795079006 | 46 °C | 10 | 0 | 0 | 0 |
| 1795078924 | 46 °C | 11 | 0 | 0 | 0 |
*Used Equation Coefficients:
CPU: 0, 1, 0
Satellite: 0, 1, 0
HDOP: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)