This is the latest recevied telemetry packets stored in our database for station/object E25PHR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Atm* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795119626 | 26 C | 1014 mBar | 0 | 0 | 0 |
| 1795117826 | 26 C | 1015 mBar | 0 | 0 | 0 |
| 1795115438 | 25 C | 1015 mBar | 0 | 0 | 0 |
| 1795113533 | 26 C | 1015 mBar | 0 | 0 | 0 |
| 1795111068 | 26 C | 1015 mBar | 0 | 0 | 0 |
| 1795109232 | 29 C | 1016 mBar | 0 | 0 | 0 |
| 1795107973 | 28 C | 1016 mBar | 0 | 0 | 0 |
| 1795105576 | 26 C | 1016 mBar | 0 | 0 | 0 |
| 1795103771 | 27 C | 1016 mBar | 0 | 0 | 0 |
| 1795102583 | 28 C | 1016 mBar | 0 | 0 | 0 |
| 1795100831 | 33 C | 1016 mBar | 0 | 0 | 0 |
| 1795100106 | 33 C | 1016 mBar | 0 | 0 | 0 |
| 1795097729 | 28 C | 1016 mBar | 0 | 0 | 0 |
| 1795095821 | 27 C | 1016 mBar | 0 | 0 | 0 |
| 1795094627 | 28 C | 1016 mBar | 0 | 0 | 0 |
| 1795092731 | 28 C | 1015 mBar | 0 | 0 | 0 |
| 1795090901 | 29 C | 1015 mBar | 0 | 0 | 0 |
| 1795089374 | 32 C | 1015 mBar | 0 | 0 | 0 |
| 1795087545 | 36 C | 1014 mBar | 0 | 0 | 0 |
| 1795087077 | 36 C | 1014 mBar | 0 | 0 | 0 |
| 1795086039 | 36 C | 1013 mBar | 0 | 0 | 0 |
| 1795084890 | 36 C | 1013 mBar | 0 | 0 | 0 |
| 1795083731 | 36 C | 1013 mBar | 0 | 0 | 0 |
| 1795083412 | 36 C | 1013 mBar | 0 | 0 | 0 |
| 1795083402 | 36 C | 1013 mBar | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Atm: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)