This is the latest recevied telemetry packets stored in our database for station/object SR2PNP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795123402 | 986 | 997 | 1 | 0 | 0 |
| 1795121609 | 974 | 995 | 1 | 0 | 0 |
| 1795119808 | 966 | 987 | 1 | 0 | 0 |
| 1795118007 | 958 | 985 | 1 | 0 | 0 |
| 1795116207 | 951 | 982 | 1 | 0 | 0 |
| 1795114406 | 942 | 981 | 1 | 0 | 0 |
| 1795112605 | 934 | 979 | 1 | 0 | 0 |
| 1795110805 | 925 | 974 | 1 | 0 | 0 |
| 1795109004 | 917 | 970 | 1 | 0 | 0 |
| 1795107203 | 908 | 968 | 1 | 0 | 0 |
| 1795105403 | 900 | 962 | 1 | 0 | 0 |
| 1795103602 | 891 | 957 | 1 | 0 | 0 |
| 1795101801 | 881 | 942 | 0 | 0 | 0 |
| 1795100008 | 870 | 932 | 0 | 0 | 0 |
| 1795098207 | 862 | 919 | 0 | 0 | 0 |
| 1795096406 | 853 | 905 | 0 | 0 | 0 |
| 1795094606 | 845 | 890 | 0 | 0 | 0 |
| 1795092805 | 836 | 877 | 0 | 0 | 0 |
| 1795091004 | 828 | 861 | 0 | 0 | 0 |
| 1795089204 | 819 | 846 | 0 | 0 | 0 |
| 1795087403 | 811 | 828 | 0 | 0 | 0 |
| 1795085602 | 803 | 811 | 0 | 0 | 0 |
| 1795083802 | 796 | 787 | 0 | 0 | 0 |
| 1795082001 | 787 | 769 | 0 | 0 | 0 |
| 1795080200 | 778 | 750 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)