This is the latest recevied telemetry packets stored in our database for station/object DL1MBW-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795084273 | 12 | 645 | 346 | 73 | 0 |
| 1795082992 | 12 | 645 | 352 | 71 | 0 |
| 1795082192 | 12 | 645 | 352 | 71 | 0 |
| 1795081871 | 12 | 644 | 355 | 72 | 0 |
| 1795081564 | 12 | 643 | 356 | 73 | 0 |
| 1795080442 | 12 | 640 | 358 | 73 | 0 |
| 1795068434 | 12 | 623 | 368 | 71 | 0 |
| 1795045857 | 12 | 626 | 379 | 70 | 0 |
| 1795040093 | 12 | 645 | 384 | 72 | 0 |
| 1795039293 | 12 | 645 | 384 | 72 | 0 |
| 1795038973 | 12 | 648 | 383 | 72 | 0 |
| 1795036248 | 12 | 650 | 388 | 71 | 0 |
| 1795035447 | 12 | 655 | 387 | 72 | 0 |
| 1795035128 | 12 | 655 | 388 | 72 | 0 |
| 1795034805 | 12 | 656 | 389 | 72 | 0 |
| 1795033043 | 12 | 663 | 392 | 73 | 0 |
| 1795032883 | 12 | 663 | 392 | 73 | 0 |
| 1795032562 | 12 | 665 | 392 | 73 | 0 |
| 1795032082 | 12 | 665 | 392 | 71 | 0 |
| 1795029676 | 12 | 672 | 397 | 71 | 0 |
| 1795029355 | 12 | 675 | 396 | 71 | 0 |
| 1795029195 | 12 | 675 | 398 | 71 | 0 |
| 1795028711 | 12 | 678 | 399 | 71 | 0 |
| 1795028391 | 12 | 680 | 399 | 71 | 0 |
| 1795028069 | 12 | 683 | 399 | 72 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)