This is the latest recevied telemetry packets stored in our database for station/object KQ6DI-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | DC* | CPU* | p-Temp* | alt* | dB* |
|---|---|---|---|---|---|
| 1795126412 | 1388 | 34.9 | 71.5 | 98 | -49 |
| 1795125811 | 1391 | 34.3 | 71.5 | 101 | -49 |
| 1795125692 | 1394 | 34.3 | 71.5 | 103 | -49 |
| 1795124971 | 1360 | 35.4 | 71.4 | 104 | -49 |
| 1795124253 | 1321 | 34.9 | 71.4 | 105 | -49 |
| 1795124011 | 1376 | 34.9 | 71.4 | 107 | -49 |
| 1795123533 | 1393 | 34.9 | 71.4 | 107 | -49 |
| 1795122812 | 1382 | 34.9 | 71.3 | 110 | -49 |
| 1795122211 | 1372 | 34.9 | 71.2 | 113 | -49 |
| 1795122092 | 1388 | 35.4 | 71.2 | 112 | -48 |
| 1795121372 | 1387 | 34.9 | 71 | 113 | -48 |
| 1795120652 | 1375 | 34.3 | 70.8 | 110 | -49 |
| 1795120411 | 1316 | 34.9 | 70.8 | 109 | -48 |
| 1795119932 | 1323 | 34.3 | 70.6 | 111 | -48 |
| 1795119212 | 1389 | 34.3 | 70.2 | 112 | -48 |
| 1795118612 | 1321 | 34.3 | 70 | 109 | -48 |
| 1795118492 | 1355 | 34.3 | 69.9 | 110 | -48 |
| 1795117772 | 1319 | 34.3 | 69.6 | 109 | -48 |
| 1795117054 | 1381 | 33.2 | 69.1 | 114 | -49 |
| 1795116811 | 1387 | 34.3 | 69.1 | 114 | -50 |
| 1795116332 | 1319 | 33.2 | 69 | 114 | -49 |
| 1795115612 | 1375 | 33.8 | 69.1 | 117 | -48 |
| 1795115010 | 1318 | 33.2 | 69.4 | 115 | -48 |
| 1795114892 | 1385 | 33.2 | 69.4 | 115 | -48 |
| 1795114172 | 1373 | 33.8 | 69.6 | 115 | -48 |
*Used Equation Coefficients:
DC: 0, 1, 1000
CPU: 0, 0.1, 0
p-Temp: 0, 0.1, 0
alt: 0, 1, -1000
dB: 0, -1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)