This is the latest recevied telemetry packets stored in our database for station/object W7EEU-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795115827 | 374 | 285 | 8 | 1 | 1 |
| 1795115692 | 390 | 272 | 8 | 6 | 1 |
| 1795115566 | 400 | 280 | 8 | 1 | 1 |
| 1795115446 | 398 | 271 | 8 | 1 | 1 |
| 1795115323 | 406 | 281 | 8 | 1 | 1 |
| 1795115203 | 400 | 273 | 8 | 1 | 1 |
| 1795115075 | 378 | 277 | 8 | 6 | 1 |
| 1795114950 | 394 | 261 | 8 | 1 | 1 |
| 1795114827 | 394 | 257 | 8 | 1 | 1 |
| 1795114702 | 388 | 261 | 7 | 1 | 1 |
| 1795114576 | 380 | 272 | 8 | 1 | 1 |
| 1795114450 | 404 | 273 | 8 | 1 | 1 |
| 1795114327 | 380 | 276 | 8 | 1 | 1 |
| 1795114198 | 378 | 280 | 8 | 1 | 1 |
| 1795114072 | 392 | 278 | 9 | 1 | 1 |
| 1795113937 | 404 | 267 | 9 | 1 | 1 |
| 1795113814 | 392 | 263 | 9 | 1 | 1 |
| 1795113688 | 380 | 274 | 9 | 1 | 1 |
| 1795113563 | 390 | 271 | 9 | 1 | 1 |
| 1795113437 | 400 | 264 | 7 | 1 | 1 |
| 1795113314 | 398 | 269 | 9 | 1 | 1 |
| 1795113191 | 396 | 284 | 10 | 1 | 1 |
| 1795113071 | 394 | 272 | 10 | 1 | 1 |
| 1795112951 | 392 | 272 | 10 | 1 | 1 |
| 1795112814 | 384 | 260 | 8 | 6 | 1 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)