This is the latest recevied telemetry packets stored in our database for station/object KI7GAI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795102857 | 426 | 608 | 0 | 0 | 0 |
| 1795102709 | 428 | 608 | 0 | 0 | 0 |
| 1795101961 | 428 | 608 | 0 | 0 | 0 |
| 1795101815 | 429 | 609 | 0 | 0 | 0 |
| 1795101507 | 424 | 609 | 0 | 0 | 0 |
| 1795101340 | 429 | 608 | 0 | 0 | 0 |
| 1795100703 | 427 | 609 | 0 | 0 | 0 |
| 1795100556 | 427 | 609 | 0 | 0 | 0 |
| 1795100401 | 430 | 609 | 0 | 0 | 0 |
| 1795100069 | 424 | 608 | 0 | 0 | 0 |
| 1795099419 | 425 | 608 | 0 | 0 | 0 |
| 1795099122 | 427 | 609 | 0 | 0 | 0 |
| 1795098973 | 424 | 608 | 0 | 0 | 0 |
| 1795098820 | 430 | 608 | 0 | 0 | 0 |
| 1795098669 | 422 | 608 | 0 | 0 | 0 |
| 1795098521 | 422 | 608 | 0 | 0 | 0 |
| 1795098509 | 430 | 608 | 0 | 0 | 0 |
| 1795098360 | 430 | 609 | 0 | 0 | 0 |
| 1795098214 | 423 | 608 | 0 | 0 | 0 |
| 1795098061 | 427 | 609 | 0 | 0 | 0 |
| 1795097912 | 425 | 609 | 0 | 0 | 0 |
| 1795097746 | 426 | 609 | 0 | 0 | 0 |
| 1795097734 | 426 | 609 | 0 | 0 | 0 |
| 1795097586 | 425 | 608 | 0 | 0 | 0 |
| 1795097435 | 431 | 609 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)