This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774488069 | 30 Count | 187 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1774486269 | 28 Count | 170 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1774484469 | 26 Count | 156 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1774482670 | 24 Count | 143 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1774480869 | 22 Count | 130 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1774477261 | 13 Count | 106 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1774475460 | 11 Count | 95 Count | 0 Count | 4.1 VDC | 1 VDC |
| 1774473662 | 9 Count | 82 Count | 0 Count | 4.11 VDC | 1 VDC |
| 1774471862 | 7 Count | 67 Count | 0 Count | 4.11 VDC | 1 VDC |
| 1774470063 | 5 Count | 51 Count | 0 Count | 4.11 VDC | 1 VDC |
| 1774468263 | 3 Count | 33 Count | 0 Count | 4.11 VDC | 1 VDC |
| 1774466463 | 1 Count | 21 Count | 0 Count | 4.11 VDC | 1 VDC |
| 1774464664 | 135 Count | 1005 Count | 0 Count | 4.11 VDC | 1 VDC |
| 1774462864 | 133 Count | 988 Count | 0 Count | 4.11 VDC | 1 VDC |
| 1774461064 | 131 Count | 971 Count | 0 Count | 4.12 VDC | 1 VDC |
| 1774459265 | 129 Count | 952 Count | 0 Count | 4.12 VDC | 1.2 VDC |
| 1774457465 | 127 Count | 933 Count | 0 Count | 4.12 VDC | 4.74 VDC |
| 1774455656 | 120 Count | 914 Count | 0 Count | 4.12 VDC | 5.08 VDC |
| 1774453857 | 118 Count | 878 Count | 0 Count | 4.12 VDC | 5.08 VDC |
| 1774452057 | 116 Count | 839 Count | 0 Count | 4.13 VDC | 5.08 VDC |
| 1774450258 | 114 Count | 815 Count | 0 Count | 4.13 VDC | 5.08 VDC |
| 1774448458 | 112 Count | 801 Count | 0 Count | 4.13 VDC | 5.08 VDC |
| 1774446658 | 110 Count | 783 Count | 0 Count | 4.13 VDC | 5.1 VDC |
| 1774444860 | 108 Count | 772 Count | 0 Count | 4.13 VDC | 5.1 VDC |
| 1774443060 | 106 Count | 755 Count | 0 Count | 4.13 VDC | 5.1 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)