This is the latest recevied telemetry packets stored in our database for station/object CE3AHV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774529093 | 4.29 VDC | 0 | 0 | 0 | 0 |
| 1774527892 | 4.45 VDC | 0 | 0 | 0 | 0 |
| 1774526692 | 4.62 VDC | 0 | 0 | 0 | 0 |
| 1774525492 | 4.58 VDC | 0 | 0 | 0 | 0 |
| 1774524291 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1774523091 | 4.4 VDC | 0 | 0 | 0 | 0 |
| 1774521891 | 4.57 VDC | 0 | 0 | 0 | 0 |
| 1774520690 | 4.55 VDC | 0 | 0 | 0 | 0 |
| 1774519490 | 4.55 VDC | 0 | 0 | 0 | 0 |
| 1774518290 | 4.71 VDC | 0 | 0 | 0 | 0 |
| 1774517090 | 4.67 VDC | 0 | 0 | 0 | 0 |
| 1774515890 | 4.57 VDC | 0 | 0 | 0 | 0 |
| 1774514690 | 4.47 VDC | 0 | 0 | 0 | 0 |
| 1774513489 | 4.48 VDC | 0 | 0 | 0 | 0 |
| 1774512289 | 4.44 VDC | 0 | 0 | 0 | 0 |
| 1774511089 | 4.57 VDC | 0 | 0 | 0 | 0 |
| 1774509889 | 4.46 VDC | 0 | 0 | 0 | 0 |
| 1774508689 | 4.57 VDC | 0 | 0 | 0 | 0 |
| 1774507489 | 4.51 VDC | 0 | 0 | 0 | 0 |
| 1774506289 | 4.58 VDC | 0 | 0 | 0 | 0 |
| 1774505088 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1774503888 | 4.43 VDC | 0 | 0 | 0 | 0 |
| 1774502688 | 4.64 VDC | 0 | 0 | 0 | 0 |
| 1774501488 | 4.7 VDC | 0 | 0 | 0 | 0 |
| 1774500288 | 4.65 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)