This is the latest recevied telemetry packets stored in our database for station/object VK2LJ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774485976 | 13.36 Volts | 29.05 Deg.C | 0 | 0 | 0 |
| 1774485676 | 13.36 Volts | 29.54 Deg.C | 0 | 0 | 0 |
| 1774485377 | 13.36 Volts | 29.54 Deg.C | 0 | 0 | 0 |
| 1774485073 | 13.33 Volts | 29.54 Deg.C | 0 | 0 | 0 |
| 1774484965 | 13.33 Volts | 29.54 Deg.C | 0 | 0 | 0 |
| 1774484735 | 13.33 Volts | 29.54 Deg.C | 0 | 0 | 0 |
| 1774484522 | 13.33 Volts | 28.56 Deg.C | 0 | 0 | 0 |
| 1774484488 | 13.33 Volts | 27.59 Deg.C | 0 | 0 | 0 |
| 1774484363 | 13.33 Volts | 27.59 Deg.C | 0 | 0 | 0 |
| 1774484339 | 13.33 Volts | 27.59 Deg.C | 0 | 0 | 0 |
| 1774484201 | 13.33 Volts | 27.59 Deg.C | 0 | 0 | 0 |
| 1774484185 | 13.36 Volts | 27.1 Deg.C | 0 | 0 | 0 |
| 1774484144 | 13.36 Volts | 27.1 Deg.C | 0 | 0 | 0 |
| 1774484085 | 13.39 Volts | 27.1 Deg.C | 0 | 0 | 0 |
| 1774483786 | 13.39 Volts | 27.1 Deg.C | 0 | 0 | 0 |
| 1774483486 | 13.36 Volts | 27.1 Deg.C | 0 | 0 | 0 |
| 1774483187 | 13.39 Volts | 27.1 Deg.C | 0 | 0 | 0 |
| 1774482888 | 13.39 Volts | 27.1 Deg.C | 0 | 0 | 0 |
| 1774482588 | 13.39 Volts | 27.1 Deg.C | 0 | 0 | 0 |
| 1774482288 | 13.39 Volts | 27.1 Deg.C | 0 | 0 | 0 |
| 1774481989 | 13.42 Volts | 27.1 Deg.C | 0 | 0 | 0 |
| 1774481690 | 13.42 Volts | 27.1 Deg.C | 0 | 0 | 0 |
| 1774481390 | 13.42 Volts | 27.1 Deg.C | 0 | 0 | 0 |
| 1774481091 | 13.42 Volts | 27.59 Deg.C | 0 | 0 | 0 |
| 1774480791 | 13.42 Volts | 27.59 Deg.C | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.489, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)