This is the latest recevied telemetry packets stored in our database for station/object IZ1RFL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774494091 | 0 Count | 806 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1774493190 | 0 Count | 798 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1774492290 | 0 Count | 787 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1774491391 | 0 Count | 780 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1774490490 | 0 Count | 763 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1774489590 | 0 Count | 750 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1774488689 | 0 Count | 734 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1774487789 | 0 Count | 712 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1774486889 | 0 Count | 697 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1774485989 | 0 Count | 683 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1774485089 | 0 Count | 675 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1774483288 | 0 Count | 656 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1774482388 | 0 Count | 646 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1774481488 | 0 Count | 635 Count | 0 Count | 4.26 VDC | 0 VDC |
| 1774480588 | 0 Count | 623 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1774479688 | 0 Count | 616 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1774478788 | 0 Count | 596 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1774477888 | 0 Count | 578 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1774476988 | 0 Count | 570 Count | 0 Count | 4.27 VDC | 0 VDC |
| 1774476088 | 0 Count | 564 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1774475188 | 0 Count | 556 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1774474288 | 0 Count | 547 Count | 0 Count | 4.23 VDC | 0 VDC |
| 1774473387 | 0 Count | 535 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1774472487 | 0 Count | 526 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1774471587 | 0 Count | 516 Count | 0 Count | 4.29 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)