This is the latest recevied telemetry packets stored in our database for station/object HK6L-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774520480 | 4 VDC | 3.88 VDC | 0 | 0 | 0 |
| 1774519579 | 4 VDC | 3.92 VDC | 0 | 0 | 0 |
| 1774518679 | 3.96 VDC | 3.8 VDC | 0 | 0 | 0 |
| 1774517779 | 4 VDC | 3.92 VDC | 0 | 0 | 0 |
| 1774516879 | 4 VDC | 3.92 VDC | 0 | 0 | 0 |
| 1774515982 | 3.95 VDC | 3.78 VDC | 0 | 0 | 0 |
| 1774515078 | 4.01 VDC | 3.94 VDC | 0 | 0 | 0 |
| 1774514178 | 3.99 VDC | 3.94 VDC | 0 | 0 | 0 |
| 1774513278 | 4 VDC | 3.88 VDC | 0 | 0 | 0 |
| 1774512377 | 4 VDC | 3.94 VDC | 0 | 0 | 0 |
| 1774511477 | 4 VDC | 3.94 VDC | 0 | 0 | 0 |
| 1774510577 | 4 VDC | 3.96 VDC | 0 | 0 | 0 |
| 1774509676 | 4 VDC | 3.92 VDC | 0 | 0 | 0 |
| 1774508776 | 4 VDC | 3.96 VDC | 0 | 0 | 0 |
| 1774507876 | 4.01 VDC | 3.96 VDC | 0 | 0 | 0 |
| 1774506976 | 4 VDC | 3.96 VDC | 0 | 0 | 0 |
| 1774506075 | 4 VDC | 3.96 VDC | 0 | 0 | 0 |
| 1774505175 | 4 VDC | 3.96 VDC | 0 | 0 | 0 |
| 1774504274 | 4 VDC | 3.96 VDC | 0 | 0 | 0 |
| 1774503374 | 4 VDC | 3.98 VDC | 0 | 0 | 0 |
| 1774502483 | 3.96 VDC | 3.84 VDC | 0 | 0 | 0 |
| 1774501573 | 4 VDC | 3.98 VDC | 0 | 0 | 0 |
| 1774500673 | 4 VDC | 3.98 VDC | 0 | 0 | 0 |
| 1774499773 | 3.96 VDC | 3.86 VDC | 0 | 0 | 0 |
| 1774498872 | 4 VDC | 4 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)