This is the latest recevied telemetry packets stored in our database for station/object DO2MIB-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774444498 | 2.98 VDC | 0 | 0 | 0 | 0 |
| 1774443597 | 3.02 VDC | 0 | 0 | 0 | 0 |
| 1774442697 | 3.04 VDC | 0 | 0 | 0 | 0 |
| 1774441796 | 3.06 VDC | 0 | 0 | 0 | 0 |
| 1774440896 | 3.08 VDC | 0 | 0 | 0 | 0 |
| 1774439996 | 3.11 VDC | 0 | 0 | 0 | 0 |
| 1774439096 | 3.13 VDC | 0 | 0 | 0 | 0 |
| 1774438196 | 3.15 VDC | 0 | 0 | 0 | 0 |
| 1774437296 | 3.17 VDC | 0 | 0 | 0 | 0 |
| 1774436396 | 3.19 VDC | 0 | 0 | 0 | 0 |
| 1774435496 | 3.21 VDC | 0 | 0 | 0 | 0 |
| 1774434596 | 3.23 VDC | 0 | 0 | 0 | 0 |
| 1774433696 | 3.25 VDC | 0 | 0 | 0 | 0 |
| 1774432795 | 3.26 VDC | 0 | 0 | 0 | 0 |
| 1774431895 | 3.28 VDC | 0 | 0 | 0 | 0 |
| 1774430995 | 3.29 VDC | 0 | 0 | 0 | 0 |
| 1774430095 | 3.31 VDC | 0 | 0 | 0 | 0 |
| 1774429195 | 3.32 VDC | 0 | 0 | 0 | 0 |
| 1774428295 | 3.34 VDC | 0 | 0 | 0 | 0 |
| 1774427395 | 3.35 VDC | 0 | 0 | 0 | 0 |
| 1774426495 | 3.36 VDC | 0 | 0 | 0 | 0 |
| 1774425594 | 3.37 VDC | 0 | 0 | 0 | 0 |
| 1774424695 | 3.38 VDC | 0 | 0 | 0 | 0 |
| 1774423794 | 3.39 VDC | 0 | 0 | 0 | 0 |
| 1774422894 | 3.4 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)