This is the latest recevied telemetry packets stored in our database for station/object OR7F-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Satelites* | Battery* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774661968 | 16 Nr | 12.34 Vdc | 7.42 | 58 | 0 |
| 1774661364 | 12 Nr | 12.34 Vdc | 7.46 | 58 | 0 |
| 1774661040 | 12 Nr | 12.32 Vdc | 7.5 | 58 | 0 |
| 1774660728 | 12 Nr | 12.34 Vdc | 7.52 | 58 | 0 |
| 1774660104 | 17 Nr | 12.34 Vdc | 7.6 | 58 | 0 |
| 1774658851 | 15 Nr | 12.34 Vdc | 7.78 | 58 | 0 |
| 1774658540 | 16 Nr | 12.34 Vdc | 7.86 | 58 | 0 |
| 1774658224 | 17 Nr | 12.34 Vdc | 7.92 | 58 | 0 |
| 1774657296 | 17 Nr | 12.34 Vdc | 8.14 | 58 | 0 |
| 1774656992 | 17 Nr | 12.34 Vdc | 8.24 | 58 | 0 |
| 1774656386 | 17 Nr | 12.34 Vdc | 8.42 | 58 | 0 |
| 1774656060 | 17 Nr | 12.34 Vdc | 8.52 | 58 | 0 |
| 1774654512 | 9 Nr | 12.34 Vdc | 9 | 58 | 0 |
| 1774654200 | 15 Nr | 12.34 Vdc | 9.14 | 58 | 0 |
| 1774653896 | 14 Nr | 12.34 Vdc | 9.22 | 58 | 0 |
| 1774653580 | 10 Nr | 12.34 Vdc | 9.3 | 58 | 0 |
| 1774653272 | 10 Nr | 12.34 Vdc | 9.42 | 58 | 0 |
| 1774652944 | 16 Nr | 12.34 Vdc | 9.5 | 58 | 0 |
| 1774652320 | 11 Nr | 12.34 Vdc | 9.64 | 58 | 0 |
| 1774652018 | 12 Nr | 12.34 Vdc | 9.7 | 58 | 0 |
| 1774651696 | 12 Nr | 12.34 Vdc | 9.78 | 58 | 0 |
| 1774651388 | 11 Nr | 12.34 Vdc | 9.82 | 58 | 0 |
| 1774651072 | 15 Nr | 12.35 Vdc | 9.88 | 58 | 0 |
| 1774650760 | 15 Nr | 12.34 Vdc | 9.94 | 58 | 0 |
| 1774650456 | 15 Nr | 12.35 Vdc | 10 | 58 | 0 |
*Used Equation Coefficients:
Satelites: 0, 1, 0
Battery: 0, 0.01, 0
Value3: 0, 0.02, -50
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)