This is the latest recevied telemetry packets stored in our database for station/object CE3SUR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774493084 | 5 | 761 | 419 | 51 | 0 |
| 1774490283 | 3 | 773 | 422 | 53 | 0 |
| 1774488229 | 5 | 776 | 418 | 52 | 0 |
| 1774485095 | 5 | 793 | 422 | 51 | 0 |
| 1774483687 | 0 | 802 | 422 | 52 | 0 |
| 1774478398 | 4 | 841 | 419 | 54 | 0 |
| 1774475414 | 6 | 864 | 422 | 50 | 0 |
| 1774472414 | 8 | 885 | 418 | 51 | 0 |
| 1774469414 | 8 | 902 | 421 | 54 | 0 |
| 1774463516 | 8 | 903 | 421 | 51 | 0 |
| 1774459274 | 6 | 811 | 422 | 47 | 0 |
| 1774452101 | 5 | 751 | 423 | 51 | 0 |
| 1774449288 | 5 | 733 | 423 | 52 | 0 |
| 1774446500 | 4 | 720 | 423 | 51 | 0 |
| 1774442145 | 6 | 706 | 423 | 51 | 0 |
| 1774439519 | 0 | 705 | 415 | 51 | 0 |
| 1774436595 | 4 | 705 | 417 | 49 | 0 |
| 1774434065 | 3 | 711 | 423 | 51 | 0 |
| 1774431316 | 5 | 710 | 414 | 49 | 0 |
| 1774428840 | 5 | 717 | 423 | 58 | 0 |
| 1774425840 | 3 | 721 | 423 | 48 | 0 |
| 1774423548 | 5 | 726 | 423 | 55 | 0 |
| 1774420816 | 7 | 731 | 416 | 50 | 0 |
| 1774418557 | 3 | 739 | 422 | 54 | 0 |
| 1774413483 | 7 | 749 | 423 | 51 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)