This is the latest recevied telemetry packets stored in our database for station/object OK2ILA-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774479386 | 4.17 VDC | 8.5 C | 8041 % | 0 | 0 |
| 1774477580 | 4.19 VDC | 8.8 C | 7999 % | 0 | 0 |
| 1774476677 | 4.19 VDC | 8.8 C | 8013 % | 0 | 0 |
| 1774475774 | 4.19 VDC | 9 C | 8016 % | 0 | 0 |
| 1774473065 | 4.19 VDC | 9.7 C | 8044 % | 0 | 0 |
| 1774470356 | 4.19 VDC | 10.4 C | 8059 % | 0 | 0 |
| 1774469453 | 4.19 VDC | 10.6 C | 8031 % | 0 | 0 |
| 1774468550 | 4.19 VDC | 11 C | 8001 % | 0 | 0 |
| 1774467647 | 4.19 VDC | 11.4 C | 8002 % | 0 | 0 |
| 1774466744 | 4.19 VDC | 11.8 C | 8000 % | 0 | 0 |
| 1774465841 | 4.19 VDC | 12.2 C | 8038 % | 0 | 0 |
| 1774464938 | 4.19 VDC | 12.5 C | 8014 % | 0 | 0 |
| 1774464035 | 4.19 VDC | 12.9 C | 8059 % | 0 | 0 |
| 1774463132 | 4.19 VDC | 13.3 C | 8080 % | 0 | 0 |
| 1774462229 | 4.19 VDC | 13.7 C | 8051 % | 0 | 0 |
| 1774461326 | 4.19 VDC | 13.9 C | 8055 % | 0 | 0 |
| 1774460423 | 4.19 VDC | 14.1 C | 8026 % | 0 | 0 |
| 1774459520 | 4.19 VDC | 14.2 C | 8020 % | 0 | 0 |
| 1774458617 | 4.19 VDC | 14.5 C | 8007 % | 0 | 0 |
| 1774457714 | 4.19 VDC | 14.9 C | 8014 % | 0 | 0 |
| 1774456811 | 4.19 VDC | 15.3 C | 8000 % | 0 | 0 |
| 1774455908 | 4.19 VDC | 15.6 C | 8010 % | 0 | 0 |
| 1774455005 | 4.19 VDC | 16 C | 8039 % | 0 | 0 |
| 1774454102 | 4.19 VDC | 16.4 C | 8006 % | 0 | 0 |
| 1774453199 | 4.19 VDC | 16.8 C | 8019 % | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)