This is the latest recevied telemetry packets stored in our database for station/object W9EN-44. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774494187 | 4.11 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1774493287 | 4.12 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1774492387 | 4.12 VDC | 1.28 VDC | 0 | 0 | 0 |
| 1774491486 | 4.12 VDC | 1.5 VDC | 0 | 0 | 0 |
| 1774490586 | 4.12 VDC | 5.3 VDC | 0 | 0 | 0 |
| 1774489686 | 4.13 VDC | 5.16 VDC | 0 | 0 | 0 |
| 1774488786 | 4.14 VDC | 15.56 VDC | 0 | 0 | 0 |
| 1774487886 | 4.14 VDC | 18.48 VDC | 0 | 0 | 0 |
| 1774486985 | 4.15 VDC | 19.38 VDC | 0 | 0 | 0 |
| 1774486085 | 4.17 VDC | 19.82 VDC | 0 | 0 | 0 |
| 1774485185 | 4.17 VDC | 20.04 VDC | 0 | 0 | 0 |
| 1774484285 | 4.17 VDC | 20.24 VDC | 0 | 0 | 0 |
| 1774483385 | 4.19 VDC | 20.2 VDC | 0 | 0 | 0 |
| 1774482484 | 4.19 VDC | 20.34 VDC | 0 | 0 | 0 |
| 1774481584 | 4.19 VDC | 20.44 VDC | 0 | 0 | 0 |
| 1774480683 | 4.21 VDC | 20.38 VDC | 0 | 0 | 0 |
| 1774479783 | 4.21 VDC | 20.44 VDC | 0 | 0 | 0 |
| 1774478883 | 4.22 VDC | 20.42 VDC | 0 | 0 | 0 |
| 1774477983 | 4.25 VDC | 20.16 VDC | 0 | 0 | 0 |
| 1774477083 | 4.16 VDC | 20.5 VDC | 0 | 0 | 0 |
| 1774476182 | 4.18 VDC | 20.48 VDC | 0 | 0 | 0 |
| 1774475282 | 4.18 VDC | 20.56 VDC | 0 | 0 | 0 |
| 1774474382 | 4.19 VDC | 20.6 VDC | 0 | 0 | 0 |
| 1774473482 | 4.2 VDC | 20.44 VDC | 0 | 0 | 0 |
| 1774472582 | 4.2 VDC | 20.22 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)