This is the latest recevied telemetry packets stored in our database for station/object N8DAH. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774473794 | 463 | 601 | 0 | 0 | 0 |
| 1774472957 | 459 | 599 | 0 | 0 | 0 |
| 1774472718 | 463 | 599 | 0 | 0 | 0 |
| 1774472598 | 456 | 599 | 0 | 0 | 0 |
| 1774472359 | 463 | 597 | 0 | 0 | 0 |
| 1774472240 | 463 | 597 | 0 | 0 | 0 |
| 1774472120 | 460 | 596 | 0 | 0 | 0 |
| 1774472001 | 452 | 596 | 0 | 0 | 0 |
| 1774471881 | 462 | 595 | 0 | 0 | 0 |
| 1774471761 | 460 | 594 | 0 | 0 | 0 |
| 1774471641 | 463 | 593 | 0 | 0 | 0 |
| 1774471523 | 458 | 591 | 0 | 0 | 0 |
| 1774471403 | 449 | 590 | 0 | 0 | 0 |
| 1774471164 | 394 | 587 | 0 | 0 | 0 |
| 1774471044 | 403 | 585 | 0 | 0 | 0 |
| 1774470925 | 475 | 582 | 0 | 0 | 0 |
| 1774438968 | 451 | 578 | 0 | 0 | 0 |
| 1774438851 | 471 | 578 | 0 | 0 | 0 |
| 1774438613 | 439 | 581 | 0 | 0 | 0 |
| 1774438493 | 434 | 580 | 0 | 0 | 0 |
| 1774438134 | 439 | 579 | 0 | 0 | 0 |
| 1774438015 | 446 | 578 | 0 | 0 | 0 |
| 1774437896 | 443 | 578 | 0 | 0 | 0 |
| 1774437777 | 441 | 578 | 0 | 0 | 0 |
| 1774437656 | 444 | 577 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)