This is the latest recevied telemetry packets stored in our database for station/object SP4HMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774500376 | 618 Count | 600 Count | 319 Count | 0 VDC | 0 VDC |
| 1774499775 | 616 Count | 598 Count | 318 Count | 0 VDC | 0 VDC |
| 1774499174 | 614 Count | 595 Count | 317 Count | 0 VDC | 0 VDC |
| 1774498574 | 607 Count | 589 Count | 311 Count | 0 VDC | 0 VDC |
| 1774497973 | 604 Count | 586 Count | 309 Count | 0 VDC | 0 VDC |
| 1774497372 | 602 Count | 584 Count | 308 Count | 0 VDC | 0 VDC |
| 1774496772 | 600 Count | 583 Count | 307 Count | 0 VDC | 0 VDC |
| 1774496171 | 597 Count | 580 Count | 305 Count | 0 VDC | 0 VDC |
| 1774495571 | 595 Count | 578 Count | 304 Count | 0 VDC | 0 VDC |
| 1774494970 | 593 Count | 577 Count | 303 Count | 0 VDC | 0 VDC |
| 1774494369 | 590 Count | 574 Count | 301 Count | 0 VDC | 0 VDC |
| 1774493769 | 588 Count | 572 Count | 300 Count | 0 VDC | 0 VDC |
| 1774493168 | 586 Count | 571 Count | 299 Count | 0 VDC | 0 VDC |
| 1774492567 | 583 Count | 568 Count | 297 Count | 0 VDC | 0 VDC |
| 1774491967 | 581 Count | 566 Count | 296 Count | 0 VDC | 0 VDC |
| 1774491366 | 579 Count | 565 Count | 295 Count | 0 VDC | 0 VDC |
| 1774490766 | 576 Count | 562 Count | 293 Count | 0 VDC | 0 VDC |
| 1774490165 | 574 Count | 560 Count | 292 Count | 0 VDC | 0 VDC |
| 1774489564 | 572 Count | 559 Count | 291 Count | 0 VDC | 0 VDC |
| 1774488963 | 569 Count | 556 Count | 289 Count | 0 VDC | 0 VDC |
| 1774488363 | 567 Count | 554 Count | 288 Count | 0 VDC | 0 VDC |
| 1774487762 | 565 Count | 553 Count | 287 Count | 0 VDC | 0 VDC |
| 1774487161 | 562 Count | 550 Count | 285 Count | 0 VDC | 0 VDC |
| 1774486561 | 560 Count | 548 Count | 284 Count | 0 VDC | 0 VDC |
| 1774485960 | 558 Count | 547 Count | 283 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)