This is the latest recevied telemetry packets stored in our database for station/object N0JME. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774483100 | 465 | 627 | 0 | 0 | 0 |
| 1774482981 | 467 | 628 | 0 | 0 | 0 |
| 1774482861 | 466 | 628 | 0 | 0 | 0 |
| 1774482792 | 465 | 628 | 0 | 0 | 0 |
| 1774482789 | 469 | 628 | 0 | 0 | 0 |
| 1774482741 | 465 | 628 | 0 | 0 | 0 |
| 1774482622 | 469 | 628 | 0 | 0 | 0 |
| 1774482383 | 465 | 628 | 0 | 0 | 0 |
| 1774480352 | 468 | 628 | 0 | 0 | 0 |
| 1774480230 | 467 | 628 | 0 | 0 | 0 |
| 1774480110 | 462 | 628 | 0 | 0 | 0 |
| 1774479997 | 469 | 628 | 0 | 0 | 0 |
| 1774479871 | 475 | 627 | 0 | 0 | 0 |
| 1774479518 | 467 | 627 | 0 | 0 | 0 |
| 1774479392 | 465 | 627 | 0 | 0 | 0 |
| 1774479153 | 467 | 627 | 0 | 0 | 0 |
| 1774478919 | 469 | 627 | 0 | 0 | 0 |
| 1774475326 | 464 | 624 | 0 | 0 | 0 |
| 1774475207 | 468 | 623 | 0 | 0 | 0 |
| 1774475087 | 405 | 623 | 0 | 0 | 0 |
| 1774474968 | 405 | 623 | 0 | 0 | 0 |
| 1774474729 | 402 | 624 | 0 | 0 | 0 |
| 1774474609 | 404 | 623 | 0 | 0 | 0 |
| 1774474489 | 407 | 623 | 0 | 0 | 0 |
| 1774474370 | 407 | 623 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)