This is the latest recevied telemetry packets stored in our database for station/object OH7LZB-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774490855 | 3222 | 2880 | 2731 | 0 | 0 |
| 1774490110 | 3222 | 2880 | 2719 | 0 | 0 |
| 1774489355 | 3222 | 2880 | 2716 | 0 | 0 |
| 1774488479 | 3222 | 2880 | 2734 | 0 | 0 |
| 1774487665 | 3222 | 2880 | 2725 | 0 | 0 |
| 1774486764 | 3222 | 2880 | 2734 | 0 | 0 |
| 1774485965 | 3225 | 2880 | 2734 | 0 | 0 |
| 1774485085 | 3222 | 2880 | 2742 | 0 | 0 |
| 1774484280 | 3222 | 2880 | 2734 | 0 | 0 |
| 1774483515 | 3222 | 2883 | 2737 | 0 | 0 |
| 1774482785 | 3222 | 2883 | 2734 | 0 | 0 |
| 1774481996 | 3222 | 2883 | 2731 | 0 | 0 |
| 1774481103 | 3225 | 2883 | 2725 | 0 | 0 |
| 1774480205 | 3225 | 2883 | 2722 | 0 | 0 |
| 1774479310 | 3225 | 2883 | 2725 | 0 | 0 |
| 1774478535 | 3225 | 2883 | 2757 | 0 | 0 |
| 1774477750 | 3225 | 2883 | 2760 | 0 | 0 |
| 1774476905 | 3225 | 2883 | 2771 | 0 | 0 |
| 1774476020 | 3225 | 2883 | 2774 | 0 | 0 |
| 1774475165 | 3225 | 2883 | 2771 | 0 | 0 |
| 1774474324 | 3225 | 2883 | 2771 | 0 | 0 |
| 1774473453 | 3225 | 2883 | 2774 | 0 | 0 |
| 1774472695 | 3225 | 2883 | 2762 | 0 | 0 |
| 1774471855 | 3225 | 2883 | 2751 | 0 | 0 |
| 1774470965 | 3225 | 2883 | 2725 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)