This is the latest recevied telemetry packets stored in our database for station/object DO5MF-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795101803 | 792 | 5811 | 7597 | 3443 | 5099 |
| 1795101202 | 792 | 5686 | 7590 | 3467 | 5080 |
| 1795100601 | 792 | 5621 | 7593 | 3488 | 5081 |
| 1795100000 | 792 | 5689 | 7595 | 3502 | 5149 |
| 1795099399 | 792 | 5975 | 7590 | 3576 | 4853 |
| 1795098788 | 792 | 6113 | 7591 | 3459 | 5079 |
| 1795098187 | 792 | 6187 | 7592 | 3347 | 5345 |
| 1795097572 | 792 | 5744 | 7593 | 3360 | 5051 |
| 1795096370 | 791 | 5743 | 7597 | 3382 | 5110 |
| 1795095769 | 791 | 5776 | 7591 | 3382 | 5262 |
| 1795095168 | 791 | 6338 | 7589 | 3368 | 5242 |
| 1795094563 | 791 | 6741 | 7591 | 3241 | 5638 |
| 1795093952 | 791 | 5692 | 7589 | 3222 | 4863 |
| 1795093351 | 791 | 5685 | 7591 | 3217 | 4866 |
| 1795092750 | 791 | 5248 | 7591 | 3213 | 4868 |
| 1795092149 | 791 | 5558 | 7589 | 3208 | 4870 |
| 1795091548 | 791 | 5217 | 7589 | 3205 | 4866 |
| 1795090947 | 791 | 5225 | 7590 | 3202 | 4867 |
| 1795090346 | 791 | 5210 | 7589 | 3200 | 4866 |
| 1795089745 | 791 | 5510 | 7591 | 3196 | 4865 |
| 1795089144 | 791 | 5237 | 7588 | 3192 | 4862 |
| 1795088543 | 791 | 5273 | 7590 | 3190 | 4861 |
| 1795087942 | 791 | 5619 | 7590 | 3188 | 4862 |
| 1795087341 | 791 | 5600 | 7590 | 3184 | 4863 |
| 1795086740 | 791 | 5684 | 7591 | 3180 | 4865 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)