This is the latest recevied telemetry packets stored in our database for station/object VK4JY-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774651661 | 414 | 610 | 0 | 0 | 0 |
| 1774651421 | 416 | 608 | 0 | 0 | 0 |
| 1774651062 | 482 | 600 | 0 | 0 | 0 |
| 1774648214 | 429 | 595 | 0 | 0 | 0 |
| 1774648094 | 422 | 593 | 0 | 0 | 0 |
| 1774647855 | 413 | 589 | 0 | 0 | 0 |
| 1774617081 | 492 | 619 | 0 | 0 | 0 |
| 1774616722 | 422 | 616 | 0 | 0 | 0 |
| 1774616602 | 490 | 616 | 0 | 0 | 0 |
| 1774616482 | 486 | 616 | 0 | 0 | 0 |
| 1774616363 | 488 | 616 | 0 | 0 | 0 |
| 1774616243 | 409 | 616 | 0 | 0 | 0 |
| 1774616123 | 486 | 617 | 0 | 0 | 0 |
| 1774616004 | 487 | 616 | 0 | 0 | 0 |
| 1774615883 | 486 | 615 | 0 | 0 | 0 |
| 1774615764 | 470 | 615 | 0 | 0 | 0 |
| 1774615524 | 463 | 615 | 0 | 0 | 0 |
| 1774615045 | 488 | 616 | 0 | 0 | 0 |
| 1774614086 | 487 | 616 | 0 | 0 | 0 |
| 1774613967 | 484 | 616 | 0 | 0 | 0 |
| 1774613728 | 489 | 616 | 0 | 0 | 0 |
| 1774613249 | 490 | 617 | 0 | 0 | 0 |
| 1774613129 | 489 | 617 | 0 | 0 | 0 |
| 1774613009 | 485 | 617 | 0 | 0 | 0 |
| 1774612889 | 489 | 617 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)