This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774498737 | 213 Count | 503 Count | 184 Count | 4.04 VDC | 0 VDC |
| 1774496937 | 206 Count | 489 Count | 178 Count | 4.04 VDC | 0 VDC |
| 1774495140 | 200 Count | 477 Count | 173 Count | 4.05 VDC | 0 VDC |
| 1774493342 | 192 Count | 462 Count | 166 Count | 4.05 VDC | 0 VDC |
| 1774491544 | 185 Count | 447 Count | 160 Count | 4.05 VDC | 0 VDC |
| 1774489747 | 178 Count | 433 Count | 154 Count | 4.05 VDC | 0 VDC |
| 1774487950 | 171 Count | 420 Count | 148 Count | 4.05 VDC | 0 VDC |
| 1774486153 | 164 Count | 406 Count | 142 Count | 4.05 VDC | 0 VDC |
| 1774484355 | 156 Count | 394 Count | 135 Count | 4.05 VDC | 0 VDC |
| 1774482559 | 149 Count | 383 Count | 129 Count | 4.06 VDC | 0 VDC |
| 1774480762 | 142 Count | 370 Count | 123 Count | 4.06 VDC | 0 VDC |
| 1774478964 | 135 Count | 358 Count | 117 Count | 4.06 VDC | 0 VDC |
| 1774477166 | 128 Count | 345 Count | 111 Count | 4.06 VDC | 0 VDC |
| 1774475369 | 120 Count | 332 Count | 104 Count | 4.06 VDC | 0 VDC |
| 1774473572 | 113 Count | 320 Count | 98 Count | 4.06 VDC | 0 VDC |
| 1774471773 | 106 Count | 307 Count | 92 Count | 4.06 VDC | 0 VDC |
| 1774469976 | 99 Count | 294 Count | 86 Count | 4.06 VDC | 0 VDC |
| 1774468178 | 92 Count | 282 Count | 80 Count | 4.07 VDC | 0 VDC |
| 1774466382 | 85 Count | 270 Count | 74 Count | 4.08 VDC | 0 VDC |
| 1774464585 | 78 Count | 258 Count | 68 Count | 4.08 VDC | 0 VDC |
| 1774462787 | 71 Count | 245 Count | 62 Count | 4.08 VDC | 0 VDC |
| 1774460988 | 64 Count | 232 Count | 56 Count | 4.08 VDC | 0 VDC |
| 1774459191 | 57 Count | 220 Count | 50 Count | 4.08 VDC | 0.56 VDC |
| 1774457392 | 49 Count | 186 Count | 43 Count | 4.08 VDC | 5.5 VDC |
| 1774455594 | 42 Count | 161 Count | 37 Count | 4.08 VDC | 5.5 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)