This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774529609 | 84 | 1005 | 0 | 422 | 224 |
| 1774527812 | 83 | 997 | 0 | 422 | 270 |
| 1774526012 | 82 | 987 | 0 | 421 | 270 |
| 1774524212 | 81 | 979 | 0 | 421 | 270 |
| 1774522412 | 80 | 971 | 0 | 421 | 270 |
| 1774520613 | 79 | 964 | 0 | 422 | 270 |
| 1774518814 | 78 | 951 | 0 | 422 | 270 |
| 1774517014 | 77 | 943 | 0 | 422 | 218 |
| 1774515216 | 76 | 935 | 0 | 422 | 220 |
| 1774513414 | 75 | 927 | 0 | 422 | 217 |
| 1774511617 | 74 | 919 | 0 | 421 | 216 |
| 1774509817 | 73 | 908 | 0 | 421 | 215 |
| 1774508016 | 72 | 894 | 0 | 420 | 216 |
| 1774506215 | 71 | 886 | 0 | 420 | 215 |
| 1774504416 | 70 | 881 | 0 | 420 | 216 |
| 1774502618 | 69 | 874 | 0 | 419 | 216 |
| 1774500819 | 68 | 866 | 0 | 419 | 40 |
| 1774499021 | 67 | 858 | 0 | 419 | 0 |
| 1774497222 | 66 | 842 | 0 | 419 | 0 |
| 1774495424 | 65 | 834 | 0 | 420 | 0 |
| 1774493624 | 64 | 826 | 0 | 420 | 0 |
| 1774491825 | 63 | 818 | 0 | 420 | 0 |
| 1774490025 | 62 | 810 | 0 | 420 | 0 |
| 1774488227 | 61 | 802 | 0 | 420 | 0 |
| 1774486428 | 60 | 794 | 0 | 420 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)