This is the latest recevied telemetry packets stored in our database for station/object SQ4HSE-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774466640 | 161 Count | 318 Count | 147 Count | 4.11 VDC | 0 VDC |
| 1774464839 | 150 Count | 296 Count | 137 Count | 4.11 VDC | 0 VDC |
| 1774463038 | 141 Count | 277 Count | 129 Count | 4.11 VDC | 0 VDC |
| 1774461237 | 126 Count | 245 Count | 115 Count | 4.11 VDC | 0 VDC |
| 1774459437 | 116 Count | 226 Count | 106 Count | 4.11 VDC | 0 VDC |
| 1774457637 | 103 Count | 201 Count | 94 Count | 4.11 VDC | 0 VDC |
| 1774455836 | 93 Count | 182 Count | 85 Count | 4.11 VDC | 0 VDC |
| 1774454035 | 82 Count | 161 Count | 75 Count | 4.11 VDC | 0 VDC |
| 1774452234 | 71 Count | 140 Count | 65 Count | 4.11 VDC | 0 VDC |
| 1774450434 | 59 Count | 117 Count | 54 Count | 4.11 VDC | 0 VDC |
| 1774448633 | 47 Count | 94 Count | 43 Count | 4.11 VDC | 0 VDC |
| 1774446832 | 38 Count | 74 Count | 35 Count | 4.11 VDC | 0 VDC |
| 1774445032 | 28 Count | 55 Count | 26 Count | 4.11 VDC | 0 VDC |
| 1774443231 | 18 Count | 36 Count | 17 Count | 4.12 VDC | 0 VDC |
| 1774441431 | 8 Count | 17 Count | 8 Count | 4.11 VDC | 0 VDC |
| 1774439630 | 531 Count | 1008 Count | 473 Count | 4.11 VDC | 0 VDC |
| 1774437829 | 520 Count | 987 Count | 463 Count | 4.11 VDC | 0 VDC |
| 1774436029 | 508 Count | 963 Count | 452 Count | 4.11 VDC | 0 VDC |
| 1774434228 | 497 Count | 942 Count | 442 Count | 4.11 VDC | 0 VDC |
| 1774432427 | 487 Count | 924 Count | 433 Count | 4.12 VDC | 0 VDC |
| 1774430626 | 478 Count | 906 Count | 425 Count | 4.11 VDC | 0 VDC |
| 1774428826 | 463 Count | 875 Count | 411 Count | 4.11 VDC | 0 VDC |
| 1774427025 | 457 Count | 865 Count | 406 Count | 4.11 VDC | 0 VDC |
| 1774425224 | 451 Count | 854 Count | 401 Count | 4.11 VDC | 0 VDC |
| 1774423424 | 443 Count | 839 Count | 394 Count | 4.11 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)