This is the latest recevied telemetry packets stored in our database for station/object KQ6DI-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774481436 | 645 | 970 | 1067 | 15 | 63 |
| 1774480654 | 655 | 976 | 1072 | 14 | 63 |
| 1774479635 | 650 | 974 | 1067 | 13 | 65 |
| 1774477836 | 645 | 970 | 1067 | 12 | 57 |
| 1774477053 | 655 | 971 | 1067 | 11 | 57 |
| 1774476035 | 650 | 975 | 1072 | 10 | 57 |
| 1774474237 | 650 | 975 | 1067 | 9 | 56 |
| 1774473453 | 645 | 966 | 1058 | 8 | 57 |
| 1774472436 | 634 | 950 | 1040 | 7 | 57 |
| 1774470635 | 612 | 914 | 1000 | 6 | 57 |
| 1774469853 | 601 | 895 | 977 | 5 | 59 |
| 1774468836 | 580 | 870 | 950 | 4 | 56 |
| 1774467036 | 537 | 815 | 864 | 3 | 56 |
| 1774466315 | 451 | 788 | 797 | 2 | 59 |
| 1774462715 | 542 | 808 | 882 | 4 | 66 |
| 1774460916 | 483 | 725 | 766 | 3 | 66 |
| 1774460195 | 386 | 671 | 662 | 2 | 62 |
| 1774454915 | 419 | 558 | 635 | 7 | 59 |
| 1774453125 | 408 | 534 | 612 | 6 | 61 |
| 1774452332 | 402 | 526 | 604 | 5 | 61 |
| 1774451315 | 397 | 517 | 590 | 4 | 61 |
| 1774449515 | 365 | 476 | 514 | 3 | 61 |
| 1774448796 | 284 | 448 | 446 | 2 | 63 |
| 1774416035 | 483 | 699 | 792 | 28 | 98 |
| 1774414235 | 505 | 722 | 815 | 27 | 98 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)