This is the latest recevied telemetry packets stored in our database for station/object W4KEL-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774491449 | 13.36 | 22.69 | 0 | 0 | 0 |
| 1774489408 | 13.36 | 23.18 | 0 | 0 | 0 |
| 1774487366 | 13.39 | 24.16 | 0 | 0 | 0 |
| 1774485324 | 13.36 | 24.65 | 0 | 0 | 0 |
| 1774483282 | 13.42 | 25.63 | 0 | 0 | 0 |
| 1774481239 | 13.39 | 26.61 | 0 | 0 | 0 |
| 1774479196 | 13.42 | 27.59 | 0 | 0 | 0 |
| 1774477154 | 13.42 | 29.05 | 0 | 0 | 0 |
| 1774475111 | 13.54 | 30.03 | 0 | 0 | 0 |
| 1774473067 | 13.6 | 31.01 | 0 | 0 | 0 |
| 1774471023 | 13.74 | 31.5 | 0 | 0 | 0 |
| 1774466936 | 14.09 | 30.52 | 0 | 0 | 0 |
| 1774464893 | 14.21 | 29.05 | 0 | 0 | 0 |
| 1774462850 | 14.27 | 27.59 | 0 | 0 | 0 |
| 1774460808 | 14.33 | 26.12 | 0 | 0 | 0 |
| 1774458766 | 14.33 | 23.67 | 0 | 0 | 0 |
| 1774456725 | 14.18 | 21.72 | 0 | 0 | 0 |
| 1774454684 | 14.21 | 20.25 | 0 | 0 | 0 |
| 1774452644 | 14.36 | 17.81 | 0 | 0 | 0 |
| 1774450603 | 14.33 | 15.36 | 0 | 0 | 0 |
| 1774448563 | 14.24 | 12.43 | 0 | 0 | 0 |
| 1774446524 | 13.51 | 11.45 | 0 | 0 | 0 |
| 1774444484 | 13.54 | 10.96 | 0 | 0 | 0 |
| 1774442444 | 13.54 | 9.98 | 0 | 0 | 0 |
| 1774438365 | 13.42 | 9.98 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.489, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)