This is the latest recevied telemetry packets stored in our database for station/object KQ6DI-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | DC* | PC Board* | Ambient* | upper* | lower* |
|---|---|---|---|---|---|
| 1774467364 | 309 | 785 | 70.1 | 1061 | 923 |
| 1774465564 | 362 | 782 | 69.7 | 1021 | 899 |
| 1774463765 | 364 | 781 | 69.1 | 943 | 841 |
| 1774461964 | 362 | 777 | 68.8 | 880 | 807 |
| 1774460164 | 364 | 774 | 68.4 | 816 | 754 |
| 1774458365 | 309 | 772 | 68.1 | 749 | 700 |
| 1774456564 | 324 | 769 | 67.9 | 686 | 659 |
| 1774454764 | 320 | 767 | 67.8 | 624 | 600 |
| 1774452965 | 317 | 768 | 67.8 | 553 | 543 |
| 1774451165 | 254 | 768 | 67.9 | 509 | 506 |
| 1774449366 | 242 | 768 | 68 | 490 | 489 |
| 1774447564 | 218 | 770 | 68.2 | 486 | 488 |
| 1774445765 | 243 | 772 | 68.6 | 494 | 494 |
| 1774443964 | 268 | 776 | 68.7 | 499 | 499 |
| 1774442164 | 245 | 777 | 68.9 | 503 | 503 |
| 1774440365 | 243 | 779 | 69.1 | 512 | 512 |
| 1774438565 | 292 | 781 | 69.5 | 520 | 521 |
| 1774436764 | 243 | 784 | 69.7 | 529 | 529 |
| 1774434965 | 257 | 787 | 69.9 | 536 | 536 |
| 1774433164 | 254 | 789 | 70.2 | 546 | 545 |
| 1774431364 | 268 | 791 | 70.5 | 555 | 554 |
| 1774429565 | 268 | 792 | 70.8 | 566 | 563 |
| 1774427764 | 243 | 796 | 71 | 582 | 576 |
| 1774425965 | 257 | 797 | 71.3 | 594 | 590 |
| 1774424165 | 243 | 800 | 71.5 | 607 | 602 |
*Used Equation Coefficients:
DC: 0, 1, 0
PC Board: 0, 1, 0
Ambient: 0, 0.1, 0
upper: 0, 1, 0
lower: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)