This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774499978 | 0 Count | 483 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774496378 | 0 Count | 474 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774492777 | 0 Count | 466 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774489177 | 0 Count | 453 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774485577 | 0 Count | 444 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1774481977 | 0 Count | 436 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774478377 | 0 Count | 427 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774474777 | 0 Count | 419 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1774471177 | 0 Count | 412 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774467576 | 0 Count | 403 Count | 0 Count | 3.91 VDC | 0 VDC |
| 1774463976 | 0 Count | 396 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774460376 | 0 Count | 388 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774456776 | 0 Count | 378 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774453176 | 0 Count | 339 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774449576 | 0 Count | 325 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774445976 | 0 Count | 304 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774442375 | 0 Count | 290 Count | 0 Count | 3.92 VDC | 0 VDC |
| 1774438775 | 0 Count | 273 Count | 0 Count | 3.92 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)