This is the latest recevied telemetry packets stored in our database for station/object DC4HF-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774493134 | 857 | 5627 | 7406 | 3080 | 3495 |
| 1774492233 | 856 | 5626 | 7406 | 3049 | 3547 |
| 1774491332 | 856 | 5628 | 7404 | 3065 | 3512 |
| 1774490430 | 856 | 5631 | 7406 | 3032 | 3565 |
| 1774489531 | 856 | 5631 | 7405 | 3045 | 3522 |
| 1774488630 | 856 | 5628 | 7402 | 3011 | 3559 |
| 1774487728 | 856 | 5631 | 7404 | 3024 | 3506 |
| 1774486827 | 856 | 5631 | 7402 | 2992 | 3534 |
| 1774485927 | 856 | 5634 | 7405 | 3010 | 3470 |
| 1774485024 | 856 | 5634 | 7404 | 2984 | 3508 |
| 1774484125 | 856 | 5638 | 7405 | 3004 | 3459 |
| 1774483223 | 856 | 5638 | 7405 | 2976 | 3484 |
| 1774482322 | 856 | 5637 | 7404 | 3002 | 3422 |
| 1774481421 | 856 | 5637 | 7405 | 3008 | 3409 |
| 1774480520 | 856 | 5641 | 7405 | 3021 | 3419 |
| 1774479619 | 856 | 5643 | 7404 | 3017 | 3459 |
| 1774478718 | 856 | 5644 | 7405 | 3058 | 3416 |
| 1774477817 | 856 | 5641 | 7401 | 3056 | 3469 |
| 1774476916 | 856 | 5645 | 7406 | 3095 | 3441 |
| 1774476015 | 856 | 5648 | 7408 | 3090 | 3509 |
| 1774475115 | 856 | 5647 | 7406 | 3121 | 3497 |
| 1774474213 | 856 | 5646 | 7407 | 3117 | 3554 |
| 1774473312 | 856 | 5653 | 7408 | 3148 | 3521 |
| 1774472411 | 856 | 5658 | 7411 | 3136 | 3570 |
| 1774471510 | 856 | 5654 | 7407 | 3166 | 3535 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)