This is the latest recevied telemetry packets stored in our database for station/object CE3SUR-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1774485290 | 12 | 853 C | 415 V | 51 M | 0 |
| 1774482287 | 12 | 870 C | 415 V | 51 M | 0 |
| 1774470967 | 12 | 932 C | 415 V | 50 M | 0 |
| 1774467966 | 12 | 931 C | 415 V | 50 M | 0 |
| 1774464965 | 12 | 926 C | 414 V | 50 M | 0 |
| 1774461965 | 12 | 917 C | 415 V | 50 M | 0 |
| 1774458965 | 12 | 908 C | 415 V | 52 M | 0 |
| 1774455966 | 12 | 873 C | 411 V | 51 M | 0 |
| 1774452966 | 12 | 846 C | 415 V | 52 M | 0 |
| 1774449966 | 12 | 815 C | 415 V | 51 M | 0 |
| 1774446966 | 12 | 789 C | 415 V | 50 M | 0 |
| 1774443965 | 12 | 766 C | 415 V | 51 M | 0 |
| 1774442306 | 12 | 764 C | 415 V | 50 M | 0 |
| 1774441881 | 12 | 760 C | 411 V | 52 M | 0 |
| 1774438880 | 12 | 752 C | 415 V | 52 M | 0 |
| 1774436655 | 12 | 755 C | 415 V | 52 M | 0 |
| 1774436201 | 12 | 750 C | 412 V | 52 M | 0 |
| 1774433199 | 12 | 755 C | 415 V | 51 M | 0 |
| 1774430198 | 12 | 761 C | 416 V | 53 M | 0 |
| 1774427196 | 12 | 767 C | 415 V | 52 M | 0 |
| 1774424195 | 12 | 775 C | 415 V | 51 M | 0 |
| 1774421193 | 12 | 781 C | 415 V | 53 M | 0 |
| 1774418196 | 12 | 788 C | 415 V | 52 M | 0 |
| 1774415195 | 12 | 796 C | 415 V | 53 M | 0 |
| 1774412193 | 12 | 804 C | 415 V | 52 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 1, 0
Volt: 0, 1, 0
Alt: 0, 1, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)