This is the latest recevied telemetry packets stored in our database for station/object N7POO-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774474324 | 461 | 664 | 0 | 0 | 0 |
| 1774474205 | 462 | 663 | 0 | 0 | 0 |
| 1774474084 | 462 | 663 | 0 | 0 | 0 |
| 1774473964 | 460 | 663 | 0 | 0 | 0 |
| 1774473844 | 463 | 661 | 0 | 0 | 0 |
| 1774473724 | 462 | 660 | 0 | 0 | 0 |
| 1774473604 | 465 | 659 | 0 | 0 | 0 |
| 1774473484 | 461 | 657 | 0 | 0 | 0 |
| 1774473364 | 462 | 655 | 0 | 0 | 0 |
| 1774473244 | 462 | 651 | 0 | 0 | 0 |
| 1774473124 | 464 | 646 | 0 | 0 | 0 |
| 1774471984 | 467 | 648 | 0 | 0 | 0 |
| 1774471864 | 463 | 642 | 0 | 0 | 0 |
| 1774468384 | 465 | 662 | 0 | 0 | 0 |
| 1774468264 | 474 | 662 | 0 | 0 | 0 |
| 1774468144 | 470 | 661 | 0 | 0 | 0 |
| 1774468024 | 467 | 661 | 0 | 0 | 0 |
| 1774467905 | 468 | 661 | 0 | 0 | 0 |
| 1774467787 | 474 | 661 | 0 | 0 | 0 |
| 1774467544 | 476 | 661 | 0 | 0 | 0 |
| 1774467424 | 469 | 661 | 0 | 0 | 0 |
| 1774466943 | 471 | 660 | 0 | 0 | 0 |
| 1774466823 | 471 | 660 | 0 | 0 | 0 |
| 1774466704 | 470 | 660 | 0 | 0 | 0 |
| 1774466344 | 460 | 659 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)