This is the latest recevied telemetry packets stored in our database for station/object VK4VH-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774486088 | 409 | 637 | 0 | 0 | 0 |
| 1774486072 | 399 | 637 | 0 | 0 | 0 |
| 1774486063 | 406 | 637 | 0 | 0 | 0 |
| 1774485340 | 395 | 637 | 0 | 0 | 0 |
| 1774485261 | 461 | 636 | 0 | 0 | 0 |
| 1774485233 | 401 | 636 | 0 | 0 | 0 |
| 1774485228 | 426 | 636 | 0 | 0 | 0 |
| 1774485186 | 396 | 636 | 0 | 0 | 0 |
| 1774484798 | 429 | 635 | 0 | 0 | 0 |
| 1774484334 | 400 | 636 | 0 | 0 | 0 |
| 1774484168 | 417 | 637 | 0 | 0 | 0 |
| 1774484108 | 404 | 637 | 0 | 0 | 0 |
| 1774484048 | 415 | 637 | 0 | 0 | 0 |
| 1774483988 | 397 | 637 | 0 | 0 | 0 |
| 1774483820 | 463 | 637 | 0 | 0 | 0 |
| 1774483541 | 403 | 637 | 0 | 0 | 0 |
| 1774483535 | 402 | 637 | 0 | 0 | 0 |
| 1774483507 | 401 | 638 | 0 | 0 | 0 |
| 1774483356 | 397 | 635 | 0 | 0 | 0 |
| 1774483351 | 408 | 635 | 0 | 0 | 0 |
| 1774483237 | 399 | 636 | 0 | 0 | 0 |
| 1774483137 | 400 | 635 | 0 | 0 | 0 |
| 1774483053 | 401 | 636 | 0 | 0 | 0 |
| 1774483044 | 399 | 635 | 0 | 0 | 0 |
| 1774482752 | 399 | 635 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)