This is the latest recevied telemetry packets stored in our database for station/object VA3RHH-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774479498 | 396 | 590 | 0 | 0 | 0 |
| 1774477708 | 395 | 589 | 0 | 0 | 0 |
| 1774475917 | 412 | 589 | 0 | 0 | 0 |
| 1774474128 | 411 | 588 | 0 | 0 | 0 |
| 1774472336 | 405 | 589 | 0 | 0 | 0 |
| 1774470546 | 413 | 589 | 0 | 0 | 0 |
| 1774466965 | 416 | 589 | 0 | 0 | 0 |
| 1774465174 | 419 | 588 | 0 | 0 | 0 |
| 1774456221 | 420 | 587 | 0 | 0 | 0 |
| 1774454431 | 410 | 587 | 0 | 0 | 0 |
| 1774452640 | 400 | 586 | 0 | 0 | 0 |
| 1774450851 | 405 | 588 | 0 | 0 | 0 |
| 1774447270 | 403 | 585 | 0 | 0 | 0 |
| 1774445480 | 406 | 582 | 0 | 0 | 0 |
| 1774443689 | 405 | 586 | 0 | 0 | 0 |
| 1774441900 | 404 | 586 | 0 | 0 | 0 |
| 1774438320 | 397 | 586 | 0 | 0 | 0 |
| 1774436529 | 403 | 586 | 0 | 0 | 0 |
| 1774434741 | 402 | 586 | 0 | 0 | 0 |
| 1774432950 | 403 | 586 | 0 | 0 | 0 |
| 1774431161 | 403 | 585 | 0 | 0 | 0 |
| 1774429370 | 404 | 585 | 0 | 0 | 0 |
| 1774425789 | 404 | 586 | 0 | 0 | 0 |
| 1774424000 | 405 | 586 | 0 | 0 | 0 |
| 1774422209 | 405 | 586 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)