This is the latest recevied telemetry packets stored in our database for station/object KC0DDZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774511443 | 414 | 620 | 0 | 0 | 0 |
| 1774511323 | 414 | 620 | 0 | 0 | 0 |
| 1774511204 | 414 | 620 | 0 | 0 | 0 |
| 1774510965 | 414 | 620 | 0 | 0 | 0 |
| 1774510846 | 414 | 620 | 0 | 0 | 0 |
| 1774510726 | 414 | 620 | 0 | 0 | 0 |
| 1774510607 | 414 | 619 | 0 | 0 | 0 |
| 1774510488 | 414 | 620 | 0 | 0 | 0 |
| 1774510369 | 414 | 620 | 0 | 0 | 0 |
| 1774510249 | 414 | 620 | 0 | 0 | 0 |
| 1774510130 | 414 | 620 | 0 | 0 | 0 |
| 1774510010 | 415 | 620 | 0 | 0 | 0 |
| 1774509891 | 415 | 620 | 0 | 0 | 0 |
| 1774509772 | 414 | 623 | 0 | 0 | 0 |
| 1774509652 | 414 | 620 | 0 | 0 | 0 |
| 1774509533 | 414 | 620 | 0 | 0 | 0 |
| 1774509414 | 414 | 620 | 0 | 0 | 0 |
| 1774509294 | 414 | 620 | 0 | 0 | 0 |
| 1774509175 | 414 | 620 | 0 | 0 | 0 |
| 1774509056 | 415 | 620 | 0 | 0 | 0 |
| 1774508937 | 414 | 621 | 0 | 0 | 0 |
| 1774508817 | 414 | 621 | 0 | 0 | 0 |
| 1774508698 | 414 | 620 | 0 | 0 | 0 |
| 1774508578 | 414 | 621 | 0 | 0 | 0 |
| 1774508459 | 415 | 621 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)