This is the latest recevied telemetry packets stored in our database for station/object VE7WNK-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774466901 | 482 | 566 | 0 | 0 | 0 |
| 1774466884 | 478 | 566 | 0 | 0 | 0 |
| 1774466847 | 481 | 565 | 0 | 0 | 0 |
| 1774466842 | 481 | 565 | 0 | 0 | 0 |
| 1774466794 | 481 | 564 | 0 | 0 | 0 |
| 1774466703 | 481 | 562 | 0 | 0 | 0 |
| 1774466657 | 483 | 561 | 0 | 0 | 0 |
| 1774466560 | 481 | 559 | 0 | 0 | 0 |
| 1774466492 | 486 | 558 | 0 | 0 | 0 |
| 1774466372 | 483 | 554 | 0 | 0 | 0 |
| 1774466313 | 489 | 553 | 0 | 0 | 0 |
| 1774466253 | 490 | 551 | 0 | 0 | 0 |
| 1774465302 | 475 | 559 | 0 | 0 | 0 |
| 1774465184 | 478 | 557 | 0 | 0 | 0 |
| 1774465064 | 479 | 555 | 0 | 0 | 0 |
| 1774465041 | 482 | 554 | 0 | 0 | 0 |
| 1774465026 | 481 | 554 | 0 | 0 | 0 |
| 1774464985 | 477 | 553 | 0 | 0 | 0 |
| 1774464946 | 479 | 552 | 0 | 0 | 0 |
| 1774464884 | 480 | 550 | 0 | 0 | 0 |
| 1774464826 | 480 | 548 | 0 | 0 | 0 |
| 1774464815 | 479 | 548 | 0 | 0 | 0 |
| 1774464763 | 481 | 546 | 0 | 0 | 0 |
| 1774464665 | 481 | 543 | 0 | 0 | 0 |
| 1774464606 | 481 | 541 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)