This is the latest recevied telemetry packets stored in our database for station/object KH6L-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774504499 | 416 | 600 | 412 | 0 | 0 |
| 1774503603 | 416 | 600 | 412 | 0 | 0 |
| 1774502706 | 417 | 602 | 412 | 0 | 0 |
| 1774501810 | 417 | 603 | 413 | 0 | 0 |
| 1774500913 | 417 | 605 | 413 | 0 | 0 |
| 1774500017 | 418 | 607 | 414 | 0 | 0 |
| 1774499120 | 419 | 609 | 415 | 0 | 0 |
| 1774498223 | 424 | 612 | 419 | 0 | 0 |
| 1774497326 | 452 | 613 | 448 | 0 | 0 |
| 1774496429 | 449 | 614 | 445 | 0 | 0 |
| 1774495531 | 446 | 615 | 442 | 0 | 0 |
| 1774494634 | 447 | 616 | 443 | 0 | 0 |
| 1774493737 | 448 | 616 | 444 | 0 | 0 |
| 1774492840 | 445 | 616 | 441 | 0 | 0 |
| 1774491943 | 443 | 616 | 438 | 0 | 0 |
| 1774491045 | 443 | 615 | 439 | 0 | 0 |
| 1774490148 | 441 | 615 | 438 | 0 | 0 |
| 1774489251 | 446 | 616 | 441 | 0 | 0 |
| 1774488354 | 437 | 616 | 433 | 0 | 0 |
| 1774487456 | 438 | 616 | 435 | 0 | 0 |
| 1774486559 | 437 | 616 | 433 | 0 | 0 |
| 1774485662 | 439 | 616 | 435 | 0 | 0 |
| 1774484764 | 440 | 616 | 436 | 0 | 0 |
| 1774483867 | 439 | 616 | 435 | 0 | 0 |
| 1774482970 | 435 | 616 | 431 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)