This is the latest recevied telemetry packets stored in our database for station/object SR7NSI-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774495646 | 686 Count | 888 Count | 32 Count | 0 VDC | 0 VDC |
| 1774495045 | 685 Count | 887 Count | 32 Count | 0 VDC | 0 VDC |
| 1774494444 | 684 Count | 886 Count | 32 Count | 0 VDC | 0 VDC |
| 1774493843 | 683 Count | 885 Count | 32 Count | 0 VDC | 0 VDC |
| 1774493243 | 682 Count | 884 Count | 32 Count | 0 VDC | 0 VDC |
| 1774492642 | 681 Count | 883 Count | 32 Count | 0 VDC | 0 VDC |
| 1774492040 | 680 Count | 882 Count | 32 Count | 0 VDC | 0 VDC |
| 1774491439 | 679 Count | 881 Count | 32 Count | 0 VDC | 0 VDC |
| 1774490839 | 678 Count | 880 Count | 32 Count | 0 VDC | 0 VDC |
| 1774490238 | 677 Count | 873 Count | 32 Count | 0 VDC | 0 VDC |
| 1774489637 | 676 Count | 872 Count | 32 Count | 0 VDC | 0 VDC |
| 1774489036 | 675 Count | 871 Count | 32 Count | 0 VDC | 0 VDC |
| 1774488435 | 674 Count | 870 Count | 32 Count | 0 VDC | 0 VDC |
| 1774487834 | 673 Count | 869 Count | 32 Count | 0 VDC | 0 VDC |
| 1774487233 | 672 Count | 868 Count | 32 Count | 0 VDC | 0 VDC |
| 1774486633 | 671 Count | 867 Count | 32 Count | 0 VDC | 0 VDC |
| 1774486032 | 670 Count | 866 Count | 32 Count | 0 VDC | 0 VDC |
| 1774485431 | 669 Count | 865 Count | 32 Count | 0 VDC | 0 VDC |
| 1774484830 | 668 Count | 864 Count | 32 Count | 0 VDC | 0 VDC |
| 1774484229 | 667 Count | 863 Count | 32 Count | 0 VDC | 0 VDC |
| 1774483628 | 666 Count | 862 Count | 32 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)