This is the latest recevied telemetry packets stored in our database for station/object SOMTNP. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774482039 | 4.2 VDC | 19.9 VDC | 0 | 0 | 0 |
| 1774481441 | 4.2 VDC | 20 VDC | 0 | 0 | 0 |
| 1774480836 | 4.2 VDC | 20.04 VDC | 0 | 0 | 0 |
| 1774480236 | 4.2 VDC | 20.26 VDC | 0 | 0 | 0 |
| 1774479636 | 4.2 VDC | 20.38 VDC | 0 | 0 | 0 |
| 1774479036 | 4.21 VDC | 20.32 VDC | 0 | 0 | 0 |
| 1774478435 | 4.21 VDC | 20.5 VDC | 0 | 0 | 0 |
| 1774477834 | 4.21 VDC | 20.48 VDC | 0 | 0 | 0 |
| 1774477234 | 4.21 VDC | 20.34 VDC | 0 | 0 | 0 |
| 1774476634 | 4.21 VDC | 20.44 VDC | 0 | 0 | 0 |
| 1774476035 | 4.22 VDC | 20.38 VDC | 0 | 0 | 0 |
| 1774475434 | 4.22 VDC | 20.16 VDC | 0 | 0 | 0 |
| 1774474834 | 4.23 VDC | 20.38 VDC | 0 | 0 | 0 |
| 1774474233 | 4.23 VDC | 20.24 VDC | 0 | 0 | 0 |
| 1774473633 | 4.24 VDC | 20.24 VDC | 0 | 0 | 0 |
| 1774473033 | 4.25 VDC | 20.24 VDC | 0 | 0 | 0 |
| 1774472433 | 4.26 VDC | 19.96 VDC | 0 | 0 | 0 |
| 1774471833 | 4.19 VDC | 20.02 VDC | 0 | 0 | 0 |
| 1774471233 | 4.19 VDC | 19.94 VDC | 0 | 0 | 0 |
| 1774470636 | 4.19 VDC | 20.44 VDC | 0 | 0 | 0 |
| 1774470036 | 4.19 VDC | 19.96 VDC | 0 | 0 | 0 |
| 1774469433 | 4.19 VDC | 19.78 VDC | 0 | 0 | 0 |
| 1774468836 | 4.19 VDC | 19.8 VDC | 0 | 0 | 0 |
| 1774468236 | 4.19 VDC | 19.9 VDC | 0 | 0 | 0 |
| 1774467636 | 4.19 VDC | 20.04 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)