This is the latest recevied telemetry packets stored in our database for station/object LD9NK-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774517146 | 4 VDC | 14.02 VDC | 0 | 0 | 0 |
| 1774516247 | 4.06 VDC | 14 VDC | 0 | 0 | 0 |
| 1774515347 | 3.99 VDC | 13.98 VDC | 0 | 0 | 0 |
| 1774514447 | 4.08 VDC | 13.98 VDC | 0 | 0 | 0 |
| 1774513549 | 4.02 VDC | 13.96 VDC | 0 | 0 | 0 |
| 1774512650 | 4.04 VDC | 13.96 VDC | 0 | 0 | 0 |
| 1774511751 | 4.04 VDC | 13.96 VDC | 0 | 0 | 0 |
| 1774510852 | 4.04 VDC | 15.18 VDC | 0 | 0 | 0 |
| 1774509953 | 3.99 VDC | 15.22 VDC | 0 | 0 | 0 |
| 1774509054 | 4.01 VDC | 15.1 VDC | 0 | 0 | 0 |
| 1774508155 | 4.02 VDC | 15.2 VDC | 0 | 0 | 0 |
| 1774507256 | 4.01 VDC | 15.22 VDC | 0 | 0 | 0 |
| 1774506357 | 4 VDC | 15.22 VDC | 0 | 0 | 0 |
| 1774505459 | 4 VDC | 15.22 VDC | 0 | 0 | 0 |
| 1774504559 | 4.01 VDC | 14.9 VDC | 0 | 0 | 0 |
| 1774503660 | 4.05 VDC | 14.88 VDC | 0 | 0 | 0 |
| 1774502761 | 4.01 VDC | 14.24 VDC | 0 | 0 | 0 |
| 1774501863 | 4 VDC | 14.26 VDC | 0 | 0 | 0 |
| 1774500964 | 4.02 VDC | 13.46 VDC | 0 | 0 | 0 |
| 1774500064 | 4.02 VDC | 13.3 VDC | 0 | 0 | 0 |
| 1774499165 | 3.96 VDC | 13.18 VDC | 0 | 0 | 0 |
| 1774498266 | 3.97 VDC | 13.12 VDC | 0 | 0 | 0 |
| 1774497368 | 4.02 VDC | 13.14 VDC | 0 | 0 | 0 |
| 1774496468 | 4.02 VDC | 13.12 VDC | 0 | 0 | 0 |
| 1774495570 | 4.01 VDC | 13.1 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)