This is the latest recevied telemetry packets stored in our database for station/object DO6GZ-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774469300 | 4.32 V | 23 | 0 | 0 | 0 |
| 1774469068 | 4.32 V | 24 | 0 | 0 | 0 |
| 1774468952 | 4.32 V | 24 | 0 | 0 | 0 |
| 1774468836 | 4.32 V | 28 | 0 | 0 | 0 |
| 1774468721 | 4.3 V | 20 | 0 | 0 | 0 |
| 1774468605 | 4.38 V | 24 | 0 | 0 | 0 |
| 1774468373 | 4.32 V | 20 | 0 | 0 | 0 |
| 1774467100 | 4.43 V | 20 | 0 | 0 | 0 |
| 1774466868 | 4.3 V | 21 | 0 | 0 | 0 |
| 1774466141 | 3.61 V | 20 | 0 | 0 | 0 |
| 1774465910 | 3.61 V | 18 | 0 | 0 | 0 |
| 1774465794 | 3.62 V | 20 | 0 | 0 | 0 |
| 1774465678 | 3.11 V | 20 | 0 | 0 | 0 |
| 1774464174 | 4.22 V | 22 | 0 | 0 | 0 |
| 1774460874 | 3.47 V | 15 | 0 | 0 | 0 |
| 1774460221 | 4.18 V | 15 | 0 | 0 | 0 |
| 1774459411 | 3.41 V | 15 | 0 | 0 | 0 |
| 1774459295 | 3.42 V | 13 | 0 | 0 | 0 |
| 1774459179 | 3.45 V | 10 | 0 | 0 | 0 |
| 1774459064 | 3.45 V | 17 | 0 | 0 | 0 |
| 1774458947 | 3.44 V | 14 | 0 | 0 | 0 |
| 1774458832 | 3.46 V | 19 | 0 | 0 | 0 |
| 1774458714 | 3.48 V | 17 | 0 | 0 | 0 |
| 1774458606 | 3.46 V | 19 | 0 | 0 | 0 |
| 1774458483 | 3.45 V | 14 | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0.01
Satellite: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)