This is the latest recevied telemetry packets stored in our database for station/object OK4AB-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temperatu* | Humidity* | BARO* | Battery* | Satellite* |
|---|---|---|---|---|---|
| 1775053688 | 24.9 C | 43.63 % | 981.5 hPa | 0 v | 12 |
| 1775053629 | 24.8 C | 43.56 % | 981.5 hPa | 0 v | 12 |
| 1775053568 | 24.7 C | 43.5 % | 981.5 hPa | 0 v | 12 |
| 1775053508 | 24.56 C | 43.57 % | 981.6 hPa | 0 v | 12 |
| 1775053449 | 24.45 C | 43.39 % | 981.6 hPa | 0 v | 12 |
| 1775053389 | 24.37 C | 43.36 % | 981.7 hPa | 0 v | 12 |
| 1775053341 | 24.35 C | 41.88 % | 981.8 hPa | 0 v | 12 |
| 1775053333 | 24.35 C | 41.88 % | 981.8 hPa | 0 v | 12 |
| 1775053329 | 24.35 C | 41.49 % | 981.8 hPa | 0 v | 12 |
| 1775053302 | 24.36 C | 40.66 % | 981.9 hPa | 0 v | 12 |
| 1775053291 | 24.37 C | 40.66 % | 981.9 hPa | 0 v | 12 |
| 1775053268 | 24.38 C | 39.53 % | 981.9 hPa | 0 v | 12 |
| 1775053258 | 24.39 C | 39.16 % | 981.9 hPa | 0 v | 12 |
| 1775053249 | 24.4 C | 38.88 % | 982 hPa | 0 v | 12 |
| 1775053238 | 24.43 C | 38.42 % | 982 hPa | 0 v | 12 |
| 1775053225 | 24.44 C | 38.4 % | 982 hPa | 0 v | 12 |
| 1775053216 | 24.45 C | 37.75 % | 982 hPa | 0 v | 12 |
| 1775053208 | 24.46 C | 39.67 % | 982 hPa | 0 v | 12 |
| 1775053205 | 24.46 C | 39.67 % | 982 hPa | 0 v | 12 |
| 1775053196 | 24.47 C | 40.05 % | 982 hPa | 0 v | 12 |
| 1775053188 | 24.5 C | 40.09 % | 982 hPa | 0 v | 12 |
| 1775053180 | 24.52 C | 39.81 % | 982.1 hPa | 0 v | 12 |
| 1775053172 | 24.54 C | 39.57 % | 982.1 hPa | 0 v | 12 |
| 1775053161 | 24.55 C | 39.47 % | 982.1 hPa | 0 v | 12 |
| 1775053153 | 24.55 C | 39.47 % | 982.1 hPa | 0 v | 12 |
*Used Equation Coefficients:
Temperatu: 0, 0.01, 0
Humidity: 0, 0.01, 0
BARO: 0, 0.1, 800
Battery: 0, 0.01, 0
Satellite: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)