This is the latest recevied telemetry packets stored in our database for station/object F5ZYZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774492073 | 410 | 0 | 0 | 0 | 0 |
| 1774491173 | 413 | 0 | 0 | 0 | 0 |
| 1774490272 | 411 | 0 | 0 | 0 | 0 |
| 1774489372 | 416 | 0 | 0 | 0 | 0 |
| 1774488482 | 413 | 0 | 0 | 0 | 0 |
| 1774487572 | 415 | 0 | 0 | 0 | 0 |
| 1774486672 | 408 | 0 | 0 | 0 | 0 |
| 1774485772 | 404 | 0 | 0 | 0 | 0 |
| 1774484872 | 406 | 0 | 0 | 0 | 0 |
| 1774483972 | 405 | 0 | 0 | 0 | 0 |
| 1774483072 | 415 | 0 | 0 | 0 | 0 |
| 1774482172 | 404 | 0 | 0 | 0 | 0 |
| 1774481272 | 416 | 0 | 0 | 0 | 0 |
| 1774480372 | 405 | 0 | 0 | 0 | 0 |
| 1774479472 | 406 | 0 | 0 | 0 | 0 |
| 1774478572 | 411 | 0 | 0 | 0 | 0 |
| 1774477672 | 413 | 0 | 0 | 0 | 0 |
| 1774476771 | 409 | 0 | 0 | 0 | 0 |
| 1774475871 | 412 | 0 | 0 | 0 | 0 |
| 1774474971 | 411 | 0 | 0 | 0 | 0 |
| 1774474071 | 412 | 0 | 0 | 0 | 0 |
| 1774473171 | 408 | 0 | 0 | 0 | 0 |
| 1774472271 | 405 | 0 | 0 | 0 | 0 |
| 1774471371 | 412 | 0 | 0 | 0 | 0 |
| 1774470471 | 412 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)