This is the latest recevied telemetry packets stored in our database for station/object SZ1SV-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774614351 | 647 Count | 172 Count | 78 Count | 0 VDC | 0 VDC |
| 1774613447 | 646 Count | 170 Count | 78 Count | 0 VDC | 0 VDC |
| 1774612544 | 644 Count | 169 Count | 77 Count | 0 VDC | 0 VDC |
| 1774611641 | 642 Count | 166 Count | 76 Count | 0 VDC | 0 VDC |
| 1774610738 | 641 Count | 166 Count | 76 Count | 0 VDC | 0 VDC |
| 1774609835 | 639 Count | 162 Count | 75 Count | 0 VDC | 0 VDC |
| 1774608932 | 635 Count | 152 Count | 72 Count | 0 VDC | 0 VDC |
| 1774608029 | 633 Count | 145 Count | 71 Count | 0 VDC | 0 VDC |
| 1774607126 | 629 Count | 139 Count | 68 Count | 0 VDC | 0 VDC |
| 1774606223 | 626 Count | 131 Count | 66 Count | 0 VDC | 0 VDC |
| 1774605320 | 623 Count | 125 Count | 64 Count | 0 VDC | 0 VDC |
| 1774604417 | 622 Count | 125 Count | 64 Count | 0 VDC | 0 VDC |
| 1774603514 | 621 Count | 125 Count | 64 Count | 0 VDC | 0 VDC |
| 1774602610 | 619 Count | 122 Count | 63 Count | 0 VDC | 0 VDC |
| 1774601707 | 617 Count | 120 Count | 62 Count | 0 VDC | 0 VDC |
| 1774600804 | 615 Count | 118 Count | 61 Count | 0 VDC | 0 VDC |
| 1774599901 | 613 Count | 117 Count | 60 Count | 0 VDC | 0 VDC |
| 1774598998 | 612 Count | 113 Count | 60 Count | 0 VDC | 0 VDC |
| 1774598095 | 610 Count | 112 Count | 59 Count | 0 VDC | 0 VDC |
| 1774597192 | 609 Count | 112 Count | 59 Count | 0 VDC | 0 VDC |
| 1774596288 | 607 Count | 110 Count | 58 Count | 0 VDC | 0 VDC |
| 1774595386 | 606 Count | 110 Count | 58 Count | 0 VDC | 0 VDC |
| 1774594482 | 605 Count | 110 Count | 58 Count | 0 VDC | 0 VDC |
| 1774593579 | 604 Count | 109 Count | 58 Count | 0 VDC | 0 VDC |
| 1774592676 | 603 Count | 106 Count | 58 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)