This is the latest recevied telemetry packets stored in our database for station/object W9KOZ-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774491472 | 441 | 613 | 0 | 0 | 0 |
| 1774491461 | 439 | 618 | 0 | 0 | 0 |
| 1774491427 | 439 | 616 | 0 | 0 | 0 |
| 1774491392 | 437 | 615 | 0 | 0 | 0 |
| 1774491379 | 440 | 615 | 0 | 0 | 0 |
| 1774491347 | 439 | 615 | 0 | 0 | 0 |
| 1774491267 | 440 | 615 | 0 | 0 | 0 |
| 1774491144 | 439 | 615 | 0 | 0 | 0 |
| 1774491024 | 441 | 615 | 0 | 0 | 0 |
| 1774490907 | 441 | 614 | 0 | 0 | 0 |
| 1774490881 | 441 | 613 | 0 | 0 | 0 |
| 1774490872 | 440 | 613 | 0 | 0 | 0 |
| 1774490818 | 441 | 613 | 0 | 0 | 0 |
| 1774490803 | 440 | 615 | 0 | 0 | 0 |
| 1774490592 | 441 | 611 | 0 | 0 | 0 |
| 1774483378 | 436 | 621 | 0 | 0 | 0 |
| 1774481425 | 444 | 629 | 0 | 0 | 0 |
| 1774481352 | 446 | 628 | 0 | 0 | 0 |
| 1774481346 | 444 | 628 | 0 | 0 | 0 |
| 1774481331 | 446 | 628 | 0 | 0 | 0 |
| 1774481326 | 444 | 628 | 0 | 0 | 0 |
| 1774481311 | 435 | 630 | 0 | 0 | 0 |
| 1774481243 | 445 | 629 | 0 | 0 | 0 |
| 1774481197 | 445 | 627 | 0 | 0 | 0 |
| 1774481189 | 446 | 627 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)