This is the latest recevied telemetry packets stored in our database for station/object WA9TT-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774472441 | 403 | 645 | 0 | 0 | 0 |
| 1774472348 | 401 | 645 | 0 | 0 | 0 |
| 1774472343 | 403 | 645 | 0 | 0 | 0 |
| 1774472307 | 402 | 646 | 0 | 0 | 0 |
| 1774472240 | 403 | 646 | 0 | 0 | 0 |
| 1774472216 | 403 | 647 | 0 | 0 | 0 |
| 1774472089 | 404 | 647 | 0 | 0 | 0 |
| 1774471958 | 405 | 647 | 0 | 0 | 0 |
| 1774471935 | 403 | 647 | 0 | 0 | 0 |
| 1774471901 | 403 | 647 | 0 | 0 | 0 |
| 1774471833 | 404 | 647 | 0 | 0 | 0 |
| 1774471766 | 404 | 647 | 0 | 0 | 0 |
| 1774471761 | 404 | 647 | 0 | 0 | 0 |
| 1774471703 | 469 | 647 | 0 | 0 | 0 |
| 1774471588 | 469 | 644 | 0 | 0 | 0 |
| 1774458785 | 467 | 609 | 0 | 0 | 0 |
| 1774458772 | 469 | 608 | 0 | 0 | 0 |
| 1774458748 | 469 | 608 | 0 | 0 | 0 |
| 1774458615 | 469 | 607 | 0 | 0 | 0 |
| 1774458550 | 469 | 605 | 0 | 0 | 0 |
| 1774458478 | 469 | 604 | 0 | 0 | 0 |
| 1774458415 | 468 | 602 | 0 | 0 | 0 |
| 1774458288 | 468 | 600 | 0 | 0 | 0 |
| 1774458265 | 468 | 599 | 0 | 0 | 0 |
| 1774458243 | 468 | 599 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)