This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795128361 | 10.34 | 266.38 | 408 | 606 | 0 |
| 1795126564 | 10.37 | 259.35 | 408 | 608 | 0 |
| 1795124765 | 10.37 | 271.66 | 408 | 633 | 0 |
| 1795122965 | 10.34 | 241.77 | 397 | 614 | 0 |
| 1795121167 | 10.37 | 222.43 | 386 | 554 | 0 |
| 1795119367 | 10.34 | 218.92 | 376 | 550 | 0 |
| 1795117569 | 10.37 | 223.31 | 381 | 552 | 0 |
| 1795115769 | 10.34 | 218.92 | 386 | 553 | 0 |
| 1795113970 | 10.37 | 214.52 | 381 | 544 | 0 |
| 1795112171 | 10.34 | 208.37 | 376 | 540 | 0 |
| 1795110372 | 10.37 | 204.85 | 376 | 530 | 0 |
| 1795108573 | 10.34 | 197.82 | 370 | 542 | 0 |
| 1795106774 | 10.34 | 176.73 | 354 | 501 | 0 |
| 1795104976 | 10.34 | 177.6 | 354 | 494 | 0 |
| 1795103176 | 10.34 | 176.73 | 354 | 497 | 0 |
| 1795101377 | 10.37 | 177.6 | 359 | 493 | 0 |
| 1795099578 | 10.37 | 179.36 | 354 | 494 | 0 |
| 1795097779 | 10.37 | 178.48 | 354 | 496 | 0 |
| 1795095980 | 10.37 | 180.24 | 354 | 496 | 0 |
| 1795094181 | 10.37 | 182.88 | 354 | 497 | 0 |
| 1795092382 | 10.37 | 184.64 | 354 | 499 | 0 |
| 1795090583 | 10.37 | 186.4 | 359 | 502 | 0 |
| 1795088784 | 10.37 | 188.15 | 365 | 508 | 0 |
| 1795086986 | 10.37 | 186.4 | 365 | 504 | 0 |
| 1795085187 | 10.34 | 186.4 | 354 | 501 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.879, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)