This is the latest recevied telemetry packets stored in our database for station/object M0FXB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774480281 | 3.71 VDC | 0.92 VDC | 0 | 0 | 0 |
| 1774479381 | 3.73 VDC | 0.82 VDC | 0 | 0 | 0 |
| 1774478481 | 3.73 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1774477580 | 3.73 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1774476680 | 3.74 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1774475780 | 3.74 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1774473980 | 3.75 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1774473079 | 3.76 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1774472179 | 3.74 VDC | 0.96 VDC | 0 | 0 | 0 |
| 1774470379 | 3.77 VDC | 0.84 VDC | 0 | 0 | 0 |
| 1774469478 | 3.77 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1774468578 | 3.77 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1774466778 | 3.78 VDC | 0.86 VDC | 0 | 0 | 0 |
| 1774465878 | 3.79 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1774464977 | 3.79 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1774463177 | 3.8 VDC | 0.98 VDC | 0 | 0 | 0 |
| 1774462371 | 3.76 VDC | 0.66 VDC | 0 | 0 | 0 |
| 1774461373 | 3.82 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1774460473 | 3.8 VDC | 0.88 VDC | 0 | 0 | 0 |
| 1774459572 | 3.81 VDC | 0.68 VDC | 0 | 0 | 0 |
| 1774458672 | 3.82 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1774457772 | 3.82 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1774456872 | 3.82 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1774455971 | 3.83 VDC | 0.94 VDC | 0 | 0 | 0 |
| 1774455071 | 3.84 VDC | 0.94 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)