This is the latest recevied telemetry packets stored in our database for station/object KE7KVP. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774471522 | 412 | 640 | 0 | 0 | 0 |
| 1774471402 | 412 | 637 | 0 | 0 | 0 |
| 1774471283 | 413 | 636 | 0 | 0 | 0 |
| 1774471163 | 411 | 637 | 0 | 0 | 0 |
| 1774471044 | 413 | 636 | 0 | 0 | 0 |
| 1774470924 | 412 | 636 | 0 | 0 | 0 |
| 1774470805 | 412 | 636 | 0 | 0 | 0 |
| 1774470565 | 413 | 637 | 0 | 0 | 0 |
| 1774470446 | 413 | 636 | 0 | 0 | 0 |
| 1774470326 | 413 | 636 | 0 | 0 | 0 |
| 1774470087 | 409 | 636 | 0 | 0 | 0 |
| 1774469967 | 415 | 636 | 0 | 0 | 0 |
| 1774469848 | 409 | 636 | 0 | 0 | 0 |
| 1774469489 | 416 | 636 | 0 | 0 | 0 |
| 1774469369 | 409 | 636 | 0 | 0 | 0 |
| 1774469250 | 417 | 636 | 0 | 0 | 0 |
| 1774469130 | 406 | 636 | 0 | 0 | 0 |
| 1774469010 | 459 | 635 | 0 | 0 | 0 |
| 1774468771 | 457 | 635 | 0 | 0 | 0 |
| 1774468651 | 412 | 635 | 0 | 0 | 0 |
| 1774468412 | 412 | 634 | 0 | 0 | 0 |
| 1774468292 | 407 | 634 | 0 | 0 | 0 |
| 1774468053 | 412 | 635 | 0 | 0 | 0 |
| 1774467934 | 413 | 633 | 0 | 0 | 0 |
| 1774467814 | 414 | 633 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)